| Customization: | Available |
|---|---|
| After-sales Service: | Installation Drawing, Installation Video |
| Install: | Online Guidance |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| steel structure Horse Riding Arena building description : QINGDAO STEEL BUILDING CO.,LTD |
| Steel structure show case we have done before QINGDAO STEEL BUILDING CO.,LTD |
|
Item
|
Popular size
|
Popular height
|
Coverage
|
Gate size
|
|
smaller horse arena
|
18x36m
|
5m
|
signle corrugated steel sheet
|
4x4m overhead door
|
|
middle horse arena
|
24x60m
|
5m
|
insulation roof with single steel sheet wall
|
4x4m overhead door |
| jump horse arena |
30x60m
|
5.5m
|
single steel sheet or only roof
|
4x4m overhead door |
Horse BarnSteel Horse Stable
20 x 40m and 20 x 60m riding arenas are generally the most common sizes as they are the two standard dimensions for dressage tests.
However, 20m can feel quite narrow for jumping and be limiting for building courses. Even an extra 5m width can make a big difference, but at least 30 x 50m would be more suitable for jumping. I used to have a client with a 30 x 60m private outdoor arena and this was a wonderful versatile size to ride in - plenty big enough for any dressage test, and the extra width made it great for jumping too.
20 x 40m should really be the smallest arena to go for. However, the smallest one I've ridden in was a 60 x 100 foot barn (just over 18 x 30m) that had been converted into an indoor school. It was usable for one horse at a time, but did feel tiny and had the wrong width/length ratio to practice a basic dressage test (there was also a large outdoor arena on site, so this was more of a bonus space for when the weather was awful). Therefore, as an absolute minimum, I'd say no narrower than 18m, and no shorter than 35/36m - any smaller will make practicing dressage tests and typical schooling movements difficult (especially when riding larger, unbalanced, or green horses), but these dimensions will feel very compact!
At the other end of the scale, there is really no upper limit to arena size - the only constraints are planning permission, available space, and of course, budget! Some of the nicest outdoor riding arenas I've ridden in (usually at competition venues) have been huge… 40 - 50m x 60 - 70m, which allow loads of room for jumping, but also space for dressage boards to be fitted inside when needed for flatwork.
For indoor schools, there is no limit on length, but there will be a constraint of how wide they can be to allow for a clear span building that has no support posts interrupting your schooling space (especially for wooden frames which usually stop at around 80 - 90 feet / approx. 24 - 27m, although steel frames can be made wider). I will discuss the ceiling height need for an indoor school later on.
| Company Name | Qingdao Steel Building Co.,Ltd |
| Application (use) |
Indoor Horse Arena Sports Halls,High Quality Horse Arena,High Quality Indoor Horse Riding Arena,horse arena,Horse Arena Building Kits,horse barns and riding arenas,Horse Building,Horse Riding Arena,Horse Riding Arenas Building,Horse Riding Hall,Horse Stable,Horse Stable House,Horse Stall,Indoor Arena,Indoor Arena For Sale,Indoor Horse Arena,Indoor Horse Barns,Indoor Horse Riding Arenas,Indoor Riding Arena Indoor Riding Arena Cost,Indoor Riding Arena Design,light steel indoor prefab horse riding arena,Light Steel Structure Indoor Horse Riding Arena Hall,Light Steel Structure Indoor Horse Riding Arena Hall Kits,Long Span Steel Indoor Horse Riding,Metal Building Horse Arena,Metal Horse Riding Arena,new design indoor horse riding arena,pre-engineered horse arena,Prefab Good Quality Indoor Riding Arenas Design,Prefab Horse Barns, Prefab Horse Riding Arena,Prefab Steel Horse Barns,Prefab Steel Structure Steel Horse Barns,Prefabricated Horse Barn,Prefabricated Steel Building,Prefabricated Warehouse,riding arena,Riding Arenas,Riding Hall,Steel Horse Arena,Steel Horse Barn,steel horse barns,Steel Horse Park Club,Steel Horse Riding Steel Riding Arena,Steel Riding Arenas,Steel Structure Horse Riding Arenas,Steel Structure Indoor Horse Riding Arena,Steel Structure Indoor Riding Arenas,Steel Structure Riding Arena |
| Clear span: (width) |
6~50m without middle column |
| Height | 2~20m |
| Length | as your requirement |
| Material Grade | Q355(S355JR)or Q235(S235JR) steel or as request |
| Column & Rafter | Welded or Hot rolled H beam |
| Tie beam | round pipe or square tube or as request |
| X brace | round steel bar,angle steel or as request |
| Purlin | C purlin, Z purlin,thickness2.0mm,2.2mm,2.5mm,3.0mm |
| sag rod | steel round bar, angle, C purlin etc |
| Wall & Roof | single corrugated steel sheet (0.3~0.8mm) EPS, mineral wool, PU sandwich Panel (Thickness:50mm,75mm,100mm,150mm,200mm) |
| Gate | Electric roller shutter door Sliding door |
| Exit Door | Plastic steel swing door Aluminum alloy swing door steel swing door |
| Window | Plastic steel sliding window Aluminum alloy sliding window |
| Surface | Shot blasting with anti rust paint hot dip galvanize |
| Certificate | ISO9001,CE EN1090 EXC2 ,IWE etc |
| Quality Control | The third party ,SGS, ASIA INSPECTION all accept |
| Other accessories | gutter,flash trimming cover,down spout, ventilation fitting, skylight belt,bolt, anchor bolt, self tapping screw etc |
| Package | main steel frame load in 40'OT,roof and wall panel load in 40'HQ! |
enclosed horse arena diagram
| steel indoor horse arena you can choose: QINGDAO STEEL BUILDING CO.,LTD |
| How to order a horse arena building from us? QINGDAO STEEL BUILDING CO.,LTD |
1)All Steel Frame parts with prefabricated. (hole,weld,surface treatment etc)
2)All the Roof and Wall Panels already cut to size for your size structure.
3)Completely window and door with hinge,handle etc hardware
4)Bolts, Screws and pop-rivets needed to secure your structure.
5)flashing and Silicone to further help insulate your structure.
6)Other Accessories you have choose: gutter,water spout,ventilation fitting,stairs etc
7)Other internal simple equipment:LED light,shelf racks etc.
| Our certificate: QINGDAO STEEL BUILDING CO.,LTD |
| Our company: QINGDAO STEEL BUILDING CO.,LTD |
1)Is your company a factory or trade company?
We are factory, so you can get the best and competitive price.
2)What's the quality assurance you provided and how do you control quality ?
Self inspect every steps during the design and fabricate, the third inspect party aslo be accept.
3) Do you offer guiding installation on site overseas for warehouse building?
Yes, We can send our professional technical engineer to supervise installation on site overseas. They have succeeded in many countries, such as Iraq, Dubai, South Africa, Algeria, and Ghana.
4) What is your main market?
Europe, Africa, Middle east asia, south east asia, Australia, New Zealand, south America etc
){kind=link}